Gesucht nach "x902d". Zeige Ergebnisse 191 bis 200 von 241.

Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.

The S-W12D4 30cm (12") sub handles up to 600 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fiber and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2Ohm to 8Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.

Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.

The S-W12D2 30cm (12") sub handles up to 600 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fiber and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2 Ohm to 8 Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

For the audiophile that’s looking to build an ideal sound system, Alpine Status offers a wide range of Hi-Res Audio enabled speakers. The HDZ-653S Slim-Fit 3-Way speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer, 96mm mid-range, and 40mm Slim-Fit tweeter that is easy to install in original tweeter locations of your car. They also include high-end speaker x-overs.

All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. Theyget very close to the AlpineF#1Status speakers look and feel, using a very similar constructing and motor assembly, as well as the identical build-materials for highest sound quality.

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

Die neue Digital Media Station Alpine iLX-W690D verfügt über einen kapazitiven 7-Zoll-Touchscreen mit hoher Auflösung und ist für eine optimale Smartphone-Anbindung, wie z.B. Apple CarPlay oder Android Auto entwickelt worden. So können alle Apps, die für die Nutzung des Smartphones während der Autofahrt zur Verfügung stehen, genutzt werden. Die Schnell-Ladefunktion für Smartphones sorgt zusätzlich dafür, dass der Akku Ihres Smartphones schnell aufgeladen wird.
Durch die sehr geringe Einbautiefe von nur 6 cm wird der Einbau auch in Fahrzeugen ohne 2-DIN-Einbautiefe deutlich vereinfacht.

Mit dem zusätzlichen 4-Kanalverstärker KTA-450  oder Monoverstärker KTA-200M können Sie Ihren iLX-W690D weiter aufrüsten und die Wiedergabeleistung um das Fünffache steigern. Beide Systeme können zu einer Einheit montiert werden. So erhalten Sie ein sehr kompaktes Paket, dass in einen normalen 2-DIN-Einbauschacht leicht Platz findet.

Dieses Power-Stack-Design wurde mit dem „Best of CES Award 2019“ ausgezeichnet.

Die UTE-200BT ist die 1-DIN Head Unit für viele Fahrzeuge. Damit erhalten Sie echten Alpine-Sound und viele Anschlussmöglichkeiten, für eine hervorragende Wiedergabe Ihrer Radiosender und Lieblingsmusik von Smartphone oder USB-Stick.

Schließen Sie Ihr iPhone oder Ihren iPod an. Jetzt können alle gespeicherten Audioinhalte, Apple Music, Spotify oder Internetradio über Bluetooth-Audio vom Smartphone aus gestreamt werden. Oder stecken Sie einfach ihren USB-Stick an - mit dieser Alpine Head Unit sind viele Abspielvarrianten möglich.

Mit dem mitgelieferten Mikrofon werden Telefongespräche in bester Sprachqualität über die integrierten Bluetooth-Freisprechfunktion möglich. Sie können sogar die Tasten- und Beleuchtungsfarben separat im gesamten RGB-Farbspektrum, nach den eigenen Wünschen einstellen oder an die Fahrzeugbeleuchtung anpassen. Eine drahtlose Fernbedienungen ist als Zubehör erhältlich.

• Verstärker: 4x 50 Watt

• 2 Paar Vorverstärkerausgänge (2 Volt)

Bring powerful bass to your vehicle with the SWC-D84CRA2
Subwoofer designed for Volkswagen Crafter 2.

The 180 Watt subwoofer comes pre-installed in a custom-fit wooden enclosure for installation under the passenger seat to add powerful bass to your existing sound system and is even compatible with the rotary seat of the Grand California camping van.

Note: a separate amplifier is required to power this subwoofer

Bring exciting bass to your vehicle with the SWC-D84T6 Subwoofer designed for Volkswagen T6.1 or T6.

The 180 Watt subwoofer come pre-installed in a custom-fit wooden enclosure for installation under the passenger seat to add powerful bass to your existing sound system and is even compatible with the rotary seat of the California camping bus.

Note: a separate amplifier is required to power this subwoofer

Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.

The S2-W10D2 25cm (10") sub handles up to 600 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fiber and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2 Ohm to 8 Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.