Gesucht nach "alpine navi x902d". Zeige Ergebnisse 201 bis 210 von 266.

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. 

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The next generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 1200 Watts RMS power @ 2 Ohms. This massive power output allows to even run multiple subs from a single amplifier. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. 

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

The KIT-8VWTX303 includes all parts for mechanical fitting of an 8-inch Alpine X803D-U / X803DC-U Head Unit, as well as an interface that allows to retain the car’s air condition and heater control screens and the optical parking sensor display.

The interface also supports the vehicle’s radio display in the instrument cluster (MFD) and Steering Wheel Remote Control. An antenna adapter with phantom feed and a power Quadlock adapter are included as well. You can even directly connect the original VW / Skoda / Seat microphone and reversing camera with the wiring harness.

Mit diesem 7-Zoll Einbauset für den Seat Leon erhalten sie alle notwendigen Teile für den Einbau des iLX-702DM in Ihren Leon.

Für die Steuerung der Klima- und Lüftungsanlage und zur Anzeige der optischen Einparkhilfe wird das Interface APF-X310MIB empfohlen. Die Funktionen der Lenkradfernbedienung bleiben mit diesem Interface ebenfalls erhalten.

 Der notwendige Antennenadapter mit Phantomspeisung gehört zum Einbauset.

Bitte beachten Sie, dass iLX-702DM ist eine Modifikation des regulären iLX-702D. Das 1-DIN-Chassis befindet sich hier in der oberen Position auf der Rückseite und kann so einfach in Ihren Seat Leon installiert werden.

Die 7-Zoll-Digital Media Station iLX-702D / iLX-702DM ist mit Digitalradio DAB⁺, HDMI, Apple CarPlay und Android Auto kompatibel.

2022 Model-Year R-Series Component and Coaxial Speakers

If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.

The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.

The “R-Series” line of speakers, subwoofers and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.

Alpine's R-Series R2-A60F amplifier reproduces high-frequency sounds up to 45,000 Hz and is Hi-Res Audio compliant, so you can enjoy the crystal-clear sound and enhanced realism you want in your music. We built some of our top-of-the-line amplifier technology into this R-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry. Whether playing high- or standard-resolution music files, you can count on superior sound quality from this amp.

The Alpine R2-A60F 4-channel amp produces 100 Watts RMS per channel @4 Ohms, perfectly matching the power ratings of Alpine's new R-Series speakers. You can also use this versatile amp in 3-channel mode, driving a pair of speakers with the front channels, and bridging the rear channels to send up to 300 Watts RMS to a subwoofer. Advanced Class-D amp technology allows this powerful amp to be built small enough to fit in almost any location.

R-Series amplifiers are available in two mono and a 4-channel configuration.

Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.

The S2-W10D4 25cm (10") sub handles up to 600 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fiber and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2 Ohm to 8 Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.

Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.

The S-W12D4 30cm (12") sub handles up to 600 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fiber and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2Ohm to 8Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.

Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.

The S-W12D2 30cm (12") sub handles up to 600 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fiber and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2 Ohm to 8 Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.

Die perfekte Erweiterung zum Concert Ensemble für Ihr Alpine Adventure Audio Lautsprechersystem im Mercedes-Benz Sprinter 907/910. Das neue SPC-W84AT6 mit einem 550 Watt 6-Kanal DSP-Verstärker und 20 cm Subwoofer-System.

Dieses Sound-Upgrade ist die passende Ergänzung zu Ihrem bestehenden Alpine Lautsprechersystem und bietet noch mehr Dynamik und Bass. So erreichen Sie das ultimativen Hörerlebnis in Ihrem Fahrzeug.

Der 550 Watt DSP-Verstärker ist perfekt auf die Raumverhältnisse im Sprinter 907/910 abgestimmt. Damit kann immer eine perfekte Klangqualität gewährleisten werden, während der mitgelieferte Kabelbaum für Original-Merceds-Radios eine schnelle Plug-and-Play-Installation in Ihrem Fahrzeug ermöglicht.

Der im Paket enthaltene 180 Watt Subwoofer im stabilen Holzgehäuse ist für den Einbau unter dem Beifahrersitz konzipiert und sorgt für kräftige Bässe.

Hinweis: Dieses System ist nur für den Betrieb mit einem originalen Mercedes-Benz 1-DIN Radio (E1D) oder MBUX-Navigationssystem ausgelegt. Wenn Sie ein Alpine oder anderes Aftermarket-Radio verwenden, wählen Sie bitte stattdessen SPC-W84AS907-R.