Gesucht nach "PMD - B200p". Zeige Ergebnisse 1 bis 10 von 122.

The KTA-200M is a very compact mono amplifier, that is mainly designed to be power-stacked with the iLX-W650BT, but can also be used stand-alone in any universal configuration.

Featuring Alpine’s Dynamic Peak Power (DPP) technology, the KTA-200M can produce 400 Watts of Alpine’s Exclusive Dynamic Peak Power for big subwoofer power in a small space.

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The S-Series S2-A55V 5-channel amplifier delivers 60 Watts RMS @ 2 Ohms of pristine high-fidelity signal to each of your car's front and rear speakers while powering a subwoofer with up to 300 Watts RMS at the same time. The amp's combination of Hi-Res Audio capabilities in its 4-channel section and extra bass power from the sub channel brings your music to life, with all the precise details, pounding beats, and emotional power clearly revealed. For a 3-channel 2-way system, you could also use the amp to drive a pair of front high-performance speakers with 120 Watts RMS each, while powering a subwoofer with 300 Watts. A variable bass boost on the sub channel allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add an optional wired remote to control the level of bass from your front seat.

High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

Alpine S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

Experience your music in Hi-Res with the R-A90S 6-channel R-Series amplifier. This is one of the most versatile Class-D 6-channel amplifiers on the market, featuring a unique staggered power channel layout that has double the power on the last two channels, as well as built-in high-pass and low-pass filters to build any kind of sound system.

The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.

The KIT-7VWX303 includes all parts for mechanical fitting of an 7-inch Alpine INE-W720D, INE-W720DC, ILX-705D Head Unit, as well as an interface that allows to retain the car’s air condition and heater control screens and the optical parking sensor display.

The interface also supports the vehicle’s radio display in the instrument cluster (MFD) and Steering Wheel Remote Control. An antenna adapter with phantom feed and a power Quadlock adapter are included as well. You can even directly connect the original VW / Skoda / Seat microphone and reversing camera with the wiring harness.

The KIT-8VWTX303 includes all parts for mechanical fitting of an 8-inch Alpine X803D-U / X803DC-U Head Unit, as well as an interface that allows to retain the car’s air condition and heater control screens and the optical parking sensor display.

The interface also supports the vehicle’s radio display in the instrument cluster (MFD) and Steering Wheel Remote Control. An antenna adapter with phantom feed and a power Quadlock adapter are included as well. You can even directly connect the original VW / Skoda / Seat microphone and reversing camera with the wiring harness.

Erhalt der Lenkradfernbedienung und Displayanzeige sowie der optischen Einparkhilfe (PDC), Klimaanlagen- und Heizungsanzeige

Die Automobilhersteller sind dazu übergegangen bestimmte Fahrzeug-Informationen auf dem original Radio-Bildschirm anzuzeigen. Obwohl der Austausch des original Radios diese Funktion nicht beeinträchtigt, möchte der Kunde die Visualisierung und Steuerung der Funktionen beibehalten. Der APF-X300VW ist unsere Lösung, die es dem Kunden ermöglicht, die Anzeige während der Bedienung von Heizung, Klimaanlage oder beim Einparken, angezeigt zu bekommen. In diesem Interface ist der Lenkradfernbedienungs- und Displayadapter (Anzeige in der MFA, inkl. Navipfeil-Anzeige) bereits mit integriert.

The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X303VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors.

• Plug-and-play wiring harness for VW platform (MIB-PQ) vehicles
• CAN-bus interface for latest generation of vehicles
• Display of air condition / heater settings on Alpine screen
• Steering wheel remote control retention
• Support of Multi-Function Display (MFD) in instrument cluster
• Parking sensor display and rear camera connectivity
• Pre-flight Check for Camper Vans
• Original hands-free microphone adaptation
• Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

Bring exciting bass to your vehicle with the SWC-W84TRA7 

Subwoofer designed for Ford Transit 7, Transit 7 Custom and Tourneo 7 Custom.

The 180 Watt subwoofer comes pre-installed in a sealed, custom-fit wooden enclosure for installation under the passenger seat to add powerful bass to your existing sound system.

Note: a separate amplifier is required to power this subwoofer

Attention: this subwoofer kit is not compatible with the Ford Nugget or Transit 7 Custom Nugget

More bass with less space - Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application.
Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600 Watts RMS and 1800 Watts max. Moreover, with its bespoke cast aluminum frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance.
Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound.
What’s more, the optional mesh grille KTE-RS10G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves.

More bass with less space - Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application.
Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600 Watts RMS and 1800 Watts max. Moreover, with its bespoke cast aluminum frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance.
Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound.
What’s more, the optional mesh grille KTE-RS10G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves.